Pressure Controller LN20D-B


Dual Valve Pressure Controller (Large Capacity)

Product Introduction

            The LN20D dual-valve pressure controller integrates two solenoid valves, the inlet valve introduces the process gas into the chamber to maintain the pressure in the confined space, and when the pressure is too high, the pressure relief valve opens by itself for pressure relief, quickly and accurately controlling the stability of the pressure while avoiding gas waste.

Product Applications

            Applications: semiconductor production, scientific research experiments, biomedicine, energy and chemical industry, leak testing, fuel cells, vacuum coating and process control, etc.

Product Overview

            The LN20D dual-valve pressure controller integrates two solenoid valves, the inlet valve introduces the process gas into the chamber to maintain the pressure in the confined space, and when the pressure is too high, the pressure relief valve opens by itself for pressure relief, quickly and accurately controlling the stability of the pressure while avoiding gas waste.
            LN20D comes standard with a pressure sensor and digital circuit board to provide high-precision, fast, stable, and reliable pressure control, and this PC digital board has all the functions needed to control the pressure. In addition to the standard RS485 output signal, the LN20D also provides analog input/output signals, which can be adjusted to precisely control the entire process. At the same time, the touchscreen display makes operation more convenient. LN20D dual-valve pressure controller can be equipped with an integrated control valve or a split control valve. It is a proportional solenoid control valve with ultra-fast and smooth control. We have different series of control valves for specific applications. Standard direct control valves are used for general applications, pilot valves are used for high flow rate applications, and dual valves are used for pressure stabilization and relief applications.

Product parameters

Technical parametersAccuracy (including linearity and hysteresis)±0.5%F.S
Pressure to range ratio1:50
repeatability≤0.1%
Sensor response time0.2s
Control stability≤±0.05% F.S (Measurement condition: 1 L/min N2)
Operating temperature-10~+70 °C
Temperature sensitivity0.1%FS/ °C
Leakage rate1×10-9 SCCS He
Bearing influence(90° variation)<0.03 KPa (Absolute/Gauge Sensor)
<0.6 KPa (differential pressure sensor)
Warm-up timeNegligible
Mechanical componentsMaterialstainless steel
Process connectionsG3/8"
Sealing materialViton/Nitrile/Neoprene/Others
Ingress Protection (Housing)IP40
Electrical characteristicspower supply15~24Vdc
Digital outputRS485/RS232
Electrical connectionsDB9

LN10-300 Pressure Controller (Low Range: ≤300KPa)

Product selection

Serial numberLN20D
Product type[C] Pressure controller 
Type of pressure[A] absolute pressure [G] gauge pressure
Withstand voltage range[M] 3MPa 
On-site display of the condition[N] Without LCD [X] With LCD display
Pressure range

[-100K]100KPa  [1M]1MPa      [5M]5MPa   

[10M]10MPa     [15M]15MPa  [20M]20MPa

The medium to be measuredSee the density reference table for details
Flow input signal[A1] 0~5VDC               [A2] 4~20mA              [A3] 1~5VDC
Output signal[B1] 0~5VDC               [B2] 4~20mA              [B3] 1~5VDC
Supply voltage[5] ±15VDC                  [4] 24VDC
Methods of Communication[8] RS485                    [2]RS232
Sealing material[V] fluoroelastomer [T] Nitrile rubber [N] neoprene [Y] others
Use connectors[A] φ10  [B] φ12  [F] 16"  [Y] Others, Please contact the manufacturer
Example of model selectionLN20D    M    A    M    N    15M    007    A1    B1    5    8    V    B
Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้